Record Facts Cache Size

Tip

Specify the maximum number of records that are to be stored in the cache.

Background

This additional parameter specifies the maximum number of records that can be stored in the Record Facts Cache. The default is 2500 records.

When to use

If the records are stored in memory, the value for this parameter should be as large as your memory allows. If you set it to too large a value, you may experience memory problems.

To change the Record Facts Cache Size:

1.	Open the Authorizer.

2.	In the Deployment Configurations window, select the configuration for which you want to change the Record Facts Cache parameter.

Usually this will be the LAN configuration.

3.	Check the Changeable check box. Now you can change this deployment configuration.

4.	On the On Line tab page, enter the desired Record Facts Cache Size value.

5.	If you also want to change the Record Facts Cache Size value for batch jobs, select the Batch tab page and enter the desired value.

6.	Save your changes.

Limitations

Changes made to this parameter are only effective if the Record Facts Cache parameter is set to In Memory or On File.